Fuel Regulator Return line project Update!
#12
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
One suggestion...I'd double clamp the intake, vent and return lines. Occassionally a single clamp will seep from a gap under the screw. By adding a second clamp rotated 180 degrees, a good seal is all but guaranteed. If it was a water line you'd only have a mess. With a fuel line you have something a whole lot worse.