6.2L performance mods...again.
#21
![Default](/forums/images/icons/icon1.gif)
Hey G, The Dealer that I bought the Boat from, installed the Imco Exhaust for me when I bought the Boat , so I can't give you a before and after scenario! I cant remember what they cost, I bought it in Jan.2002. I'll dig through my Files and try to find a reciept.
I'm turning Labbed 3blades , 23 pitch, WOT 5100 rpm,, Speedo 72, gps 69.3,MPH,,, Bravo 1,, 1.5,,
I know I have a few more RPM to play with, I'm hoping the K&N might help that a little.
How tight {rpm's} are you running yours at WOT?
I'm turning Labbed 3blades , 23 pitch, WOT 5100 rpm,, Speedo 72, gps 69.3,MPH,,, Bravo 1,, 1.5,,
I know I have a few more RPM to play with, I'm hoping the K&N might help that a little.
How tight {rpm's} are you running yours at WOT?
Last edited by mama tryed; 04-01-2004 at 04:44 AM.
#23
Registered
Join Date: Oct 2000
Location: Eaton Rapids, Mi , USA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I do not know if the chargers are the same or not. I got the #s off of the Box the cleaners came in. I did not notice a difference with the cleaners but, They look cool.
Most 6.2s have the 1.65 outdrive on them. I wonder if they changed the ratio in the later ones. I also like these engines and I turn mine about 5k. I run 2 different props I have a pair of 23s and a pair of 25s. My top speed is from 62-65 on gps. It depends on how the payload is. My boat is a big 33 so the speed is not to bad considering the size of my boat. Dwight
Most 6.2s have the 1.65 outdrive on them. I wonder if they changed the ratio in the later ones. I also like these engines and I turn mine about 5k. I run 2 different props I have a pair of 23s and a pair of 25s. My top speed is from 62-65 on gps. It depends on how the payload is. My boat is a big 33 so the speed is not to bad considering the size of my boat. Dwight
#24
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
Join Date: Jun 2003
Location: Stonybrook, NY
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
mama/dwight...
I have a new 29 Fountain Fever with the twin 6.2's. As you are probably aware, the Fever is fairly light and has little in the way of amenities, no stove, air, etc. In stock trim it runs 71 on the gps with the 20 hours I managed to use it after delivery in the fall. I have the 1.65 ratio standard Bravo drives and with stock 26" Bravo1 props and was hitting the rev limiter at 5350rpm (trimmed out, nearly full fuel, 2 souls on board).
I had the props labbed by Houston Propeller and they also pitched them up to 27"...I hope to gain 1-2 mph and bring down the rpm. Things are starting to warm up around here and I will give you an update when I splash the boat in (I hope!) a couple of weeks.
Whitey, alot of people agree with you that there is no increase in performance when changing to the Filterchargers...but they definitely do look cool! Do you know if there are any problems with Coast Guard safety checks?
G-
I have a new 29 Fountain Fever with the twin 6.2's. As you are probably aware, the Fever is fairly light and has little in the way of amenities, no stove, air, etc. In stock trim it runs 71 on the gps with the 20 hours I managed to use it after delivery in the fall. I have the 1.65 ratio standard Bravo drives and with stock 26" Bravo1 props and was hitting the rev limiter at 5350rpm (trimmed out, nearly full fuel, 2 souls on board).
I had the props labbed by Houston Propeller and they also pitched them up to 27"...I hope to gain 1-2 mph and bring down the rpm. Things are starting to warm up around here and I will give you an update when I splash the boat in (I hope!) a couple of weeks.
Whitey, alot of people agree with you that there is no increase in performance when changing to the Filterchargers...but they definitely do look cool! Do you know if there are any problems with Coast Guard safety checks?
G-
Last edited by gferdon; 04-01-2004 at 08:58 AM.
#26
![Default](/forums/images/icons/icon1.gif)
What Oil are you Guy's running? I have always used Mobil One , Synthetic..15- 40 I think it is,, but I bought a Case of Royal Purple this Week , straight 30 , that I'm going to use,, I freaked when he told me the Price of the Case
and Ithought Mobile One was high!!!
I have always used the Wix Hi-perf Filter #51069
You guys have me curios on my Drive Ratio now, I'm going to lok a little bit closer today, when i'm changing my oil!!
5350 rpm is where you "bumped" ,,intresting ,, I may have to tell Julie I need a little more,, next time I have any prop work done......
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
I have always used the Wix Hi-perf Filter #51069
You guys have me curios on my Drive Ratio now, I'm going to lok a little bit closer today, when i'm changing my oil!!
5350 rpm is where you "bumped" ,,intresting ,, I may have to tell Julie I need a little more,, next time I have any prop work done......
#27
Registered
Join Date: Oct 2000
Location: Eaton Rapids, Mi , USA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I am a M1 fan but, I have found that I get the best oil pressure with a 40 wt. So I use castro 40 when possible. In case you have not noticed the oil pressure on the 6.2 is what I would consider on the low side but, I have heard it is to do with the oil pump and it is a drag reducing trick used by GM. It does not cause a problem but, it kinda makes you worry the first time out.
I have been using the wix filter also. Another thing you may want to consider is to add a oil cooler. I am not sure why but Merc did not add one to this engine. Dwight
I have been using the wix filter also. Another thing you may want to consider is to add a oil cooler. I am not sure why but Merc did not add one to this engine. Dwight
#29
Registered
Join Date: Oct 2000
Location: Eaton Rapids, Mi , USA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Well they are coming along. I have a delima right now. I took my boat back to the plant to get some repairs done and someone saw it and are very interested in buying it. So I am on a holding patern until I hear back as to wether they want to buy or not. If I sell I am going back to a single. Dwight