throttle lever extention kit?
09-19-2003, 08:10 PM
#1
Registered
Thread Starter
Join Date: Nov 2002
Location: Brick, NJ
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
throttle lever extention kit?
Does anyone know if Barry Grant has a throttle lever extension kit for their demon carb? I need to make the "throw" longer on the carb and I am just avoiding fabricating one. I can not get the full range on my throttles. Any ideas? Thanks,Keith
09-19-2003, 11:19 PM
#2
Charter Member #232
Charter Member
What kind of throttles do you have? Ussually there are two placed to mount the cable up at the throttle end. The farther out you go the longer the cable throw. You should not need one I do not think.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
09-20-2003, 09:51 AM
#3
Registered
Keith
If you move the mounting point down closer to the throttle shaft on the linkage it will give you a quicker throw.
Doug Schriefer
Head of Technical Services
Barry Grant, Inc.
PS. If you're still having problems give me a call at the shop (706) 864-8544 ext. 125
If you move the mounting point down closer to the throttle shaft on the linkage it will give you a quicker throw.
Doug Schriefer
Head of Technical Services
Barry Grant, Inc.
PS. If you're still having problems give me a call at the shop (706) 864-8544 ext. 125
Thread
Thread Starter
Forum
Replies
Last Post
still smoking
General Boating Discussion
7
05-29-2007 05:04 PM
