Stringer Replacement Formula 302
03-04-2004, 12:28 AM
#111
Charter Member #232
Charter MemberThread Starter
Today I got smart. I have a vacume for the table saw. So I took that and used it as a vacume to suck up the dust. It worked very well.
__________________
Put your best foot forward!
Put your best foot forward!
03-04-2004, 12:35 AM
#112
Charter Member #232
Charter MemberThread Starter
The hose location could be changed around to be put in the line of the dust coming off the grinder.
__________________
Put your best foot forward!
Put your best foot forward!
03-04-2004, 04:40 PM
#113
Registered
All I have to say is "wow". What a project.
Let me help you fund the rest of it. Sent you pics since we last spoke but didn't hear back from you. Need to speak with you ASAP about speakers. Please call 800-635-2313 -thanks. -Andrew
Let me help you fund the rest of it. Sent you pics since we last spoke but didn't hear back from you. Need to speak with you ASAP about speakers. Please call 800-635-2313 -thanks. -Andrew
03-05-2004, 10:05 AM
#114
Registered
Join Date: Jan 2002
Location: burlington, ia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
dude
you get an a+ for detication to your boat, but with all of the changes and upgrades you have made since you
bought it your going to have to change the name to
audiocraft because there is more of you in it than formula.
you get an a+ for detication to your boat, but with all of the changes and upgrades you have made since you
bought it your going to have to change the name to
audiocraft because there is more of you in it than formula.
03-05-2004, 04:59 PM
#115
Charter Member #232
Charter MemberThread Starter
HP I am trying to figure that out myself. When I am done and want to sell it can I call it a 2004? 
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
03-07-2004, 10:19 PM
#117
Charter Member #232
Charter MemberThread Starter
Thanks Homan
Ok this weekend I was back at it. I got the outer stringers sanded out on Thursday, then I Fit them on Saturday and cut all the glass. I also glassed the forward edge of the rear most bulkhead.
Today I glassed in the two stringers. It was a long 4 hours of glassing. It came out the nuts and you can really feel the difference in the strength of the hull and all the stringer assembly.
Ok this weekend I was back at it. I got the outer stringers sanded out on Thursday, then I Fit them on Saturday and cut all the glass. I also glassed the forward edge of the rear most bulkhead.
Today I glassed in the two stringers. It was a long 4 hours of glassing. It came out the nuts and you can really feel the difference in the strength of the hull and all the stringer assembly.
__________________
Put your best foot forward!
Put your best foot forward!
03-07-2004, 10:24 PM
#120
Charter Member #232
Charter MemberThread Starter
Over the week I hope to fit the floor back in and perhaps put the poor foam in this week.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
