SBC Vortec Cam Recommendations!
#22
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
SmallPP:
If you already have the heads off, then use some clay and check the intake and exhaust valve clearence to the piston before you install a cam with .480 lift or more, especially if you plan to use 1.6 rockers. Its a quick check and it could save you a lot of broken motors later. Valves don't get along well with piston tops and when you increase durations, they get closer without changing lift. Food for thought?
Raylar
If you already have the heads off, then use some clay and check the intake and exhaust valve clearence to the piston before you install a cam with .480 lift or more, especially if you plan to use 1.6 rockers. Its a quick check and it could save you a lot of broken motors later. Valves don't get along well with piston tops and when you increase durations, they get closer without changing lift. Food for thought?
Raylar