Mercruiser valve spings and head gaskets
#1
Guest
Posts: n/a
Mercruiser valve spings and head gaskets
Hi have apair of 97 525sc with 300 hrs on them going to pull the heads replace head gaskets and do a valve job I also want to replace the valve spings can anyone tell me who makes the valve spings ? I have read it was crane dose anyone have the correct crane part # also whats the best recomendation on a head gasket Fel pro? anyone got a part # thanks
#2
Platinum Member
Platinum Member
Join Date: Nov 2003
Location: Stockholm, Sweden
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
I have always been using Fel-Pro #8180PT2 head gaskets on my 454's
Regarding springs, go with the Iskys.I think they are way better than Crane.
Regarding springs, go with the Iskys.I think they are way better than Crane.
#3
Registered
The 525sc has a flat tappet hyd. cam. You can look up the parts at www.cranecams.com. The cam is pretty mild and the Crane valve springs last a long time. I've had several engines with this cam and never had a problem. My last one had 600+ hrs on them when I sold it.
#4
10x
VIP Member
Good advice from PatriYacht.........follow it.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
#5
Registered
Join Date: May 2002
Location: Tampabay Florida
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Glad some of you had good luck with Crane, I just broke a valve spring at 30hours. This weekend I'm installing the Comp 929 springs. Hopefully they work out better.
Do a search on the Subject. Unfortunately Crane valve springs don't have a good reputatation in IMHO.
Felpro gaskets work good. Felpro intake gaskets can be a little big around the water jacket, make sure you get the right gaskets for your application.
Good luck
Do a search on the Subject. Unfortunately Crane valve springs don't have a good reputatation in IMHO.
Felpro gaskets work good. Felpro intake gaskets can be a little big around the water jacket, make sure you get the right gaskets for your application.
Good luck
#9
Registered
Join Date: May 2002
Location: Tampabay Florida
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Patri yacht,
The Crane springs that broke at 30 hours are the new design. I probably got the set that was made on a late fri afternoon . plus it damaged my rocker arm. I have switched to Comp 929 springs with the Comp Pro Magnum rockers. Hopefully these are going to last.
The Crane springs that broke at 30 hours are the new design. I probably got the set that was made on a late fri afternoon . plus it damaged my rocker arm. I have switched to Comp 929 springs with the Comp Pro Magnum rockers. Hopefully these are going to last.