Mirage conversion to ACCLERATOR
#22
Registered
Join Date: Nov 2000
Location: Continental,United States
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
There is roughly a speed gain of 1.5 mph per 100 RPM increase across the board assuming an equal amount of prop slip. As Darin knows that prop and water relationship is akin to a ring and pinion with a variable of slip. If your speed does not increase equal to the RPM increase, then you have more slip. That is a round about answer to your question. As far as the ancient Chinese part I don't know, he is the expert on that.
#23
Registered
Join Date: Oct 2003
Location: Ballston Spa, New York
Posts: 532
Likes: 0
Received 12 Likes
on
10 Posts
![Default](/forums/images/icons/icon1.gif)
Originally posted by HOUSTONPROP
here is a skegguard we removed the stabilizer fin and welded it solid. we polish and weld alot of different items.
here is a skegguard we removed the stabilizer fin and welded it solid. we polish and weld alot of different items.
I have (8) 4" x 8" stainless steal plates that I need polished - they are currently in the rough stage - is this something that you can do??
#24
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
yes ,no problem as long as it's not 4'x8'
send me a picture or just ship away,we will be as reasonable as we can on cost,just depends if they require any welding ,and have a lot of foreign object debris marks.
also what is the thickness? any idea
![Big Grin](/forums/images/smilies/biggrin.gif)
send me a picture or just ship away,we will be as reasonable as we can on cost,just depends if they require any welding ,and have a lot of foreign object debris marks.
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
![Wink](/forums/images/smilies/wink.gif)
also what is the thickness? any idea
Last edited by HOUSTONPROP; 03-08-2004 at 03:26 PM.
#30
Geronimo36
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Is there anything to be gained in midrange? I know that labbing typically increases top speed but sometimes you loose cruise speed.
I am running about 51mph at 3600, and 75-77 mph (depending on the load, temp etc) at 5050 rpms.
The motors are designed to run up to about 5200-5300. What kind of gains can I expect across the board. I am running 25P Mirage Plus in a, 86' Scarab Panther with TRS drives.
Merc recommended that I may want to try a set of 27 labbed mirage plus to keep the cruise speed up and gain a little bit on the top end. What do you think of this idea? I am affraid of bigger props on these TRS as I have blown lowers twice.
I am running about 51mph at 3600, and 75-77 mph (depending on the load, temp etc) at 5050 rpms.
The motors are designed to run up to about 5200-5300. What kind of gains can I expect across the board. I am running 25P Mirage Plus in a, 86' Scarab Panther with TRS drives.
Merc recommended that I may want to try a set of 27 labbed mirage plus to keep the cruise speed up and gain a little bit on the top end. What do you think of this idea? I am affraid of bigger props on these TRS as I have blown lowers twice.