Mirage conversion to ACCLERATOR
#61
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Question](/forums/images/icons/icon5.gif)
Kevin Thanks for posting,I will gladly re-work the prop for you,we may need to thin a little more and reduce the cupping ,cupping is very crictal.
and if we add too much in the prop we blew-it.we just did not hit the spot on yours,we will take care of it, and get you the extra speed you deserve. ITS THERE to be had.
Thanks again, Darin
and if we add too much in the prop we blew-it.we just did not hit the spot on yours,we will take care of it, and get you the extra speed you deserve. ITS THERE to be had.
![Big Grin](/forums/images/smilies/biggrin.gif)
![Smilie](/forums/images/smilies/smile.gif)
Thanks again, Darin
Last edited by HOUSTONPROP; 05-07-2004 at 11:41 AM.
#62
![Default](/forums/images/icons/icon1.gif)
hi darin finaly got to try my prop .got on plain much faster .then a little blow out ,trim up ,then it hit .was like hiting secont gear ..midrange was great ,top speed 5000rpm last years gas .73.8 gps great job darin .THANKS .
#63
Registered
Join Date: Jul 2001
Location: Rockford, IL
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
thanks for talking with me darin and taking care of the prop, you should see it on your step wednesday!!
call me when you get to look at it and let me know what you think!
kevin
call me when you get to look at it and let me know what you think!
kevin
#64
![Default](/forums/images/icons/icon1.gif)
Darin...I am wondering what the difference I should expect to see between a my Michagan Ballistic Prop labbed by you and A Mirage/Plus you re-work with your design. What would the difference be? I have 2 Ballistics a Mirage and a Mirage Plus...I really only need 2....So I need figure which ones to keep. I can PM you any info you need on figures etc.....Do you take trade ins?
Can't hurt to ask right
Thanks
Randy
"Bad-Habit"
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
Thanks
Randy
"Bad-Habit"
#66
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Hey Darin,
I have run my new Accelerator twice now.
Great hole shot with no blowout!
Need to get out in some rough stuff and try it there.
Job Well Done.
I have run my new Accelerator twice now.
Great hole shot with no blowout!
Need to get out in some rough stuff and try it there.
Job Well Done.
![Smilie](/forums/images/smilies/smile.gif)
__________________
Patrick
Patrick
#68
Registered
![Default](/forums/images/icons/icon1.gif)
Also Darin,
can you post your email address. I must thave miss spelled as my email was returned. was forwarding pics of my 25 quicksilver for you to consider.
Rob from Holland, mich
Rambunctious
can you post your email address. I must thave miss spelled as my email was returned. was forwarding pics of my 25 quicksilver for you to consider.
Rob from Holland, mich
Rambunctious
#69
Guest
Posts: n/a
![Default](/forums/images/icons/icon1.gif)
Darin, just wanted to let you know all is well with the prop. I ran this weekend and it handled just as it did when the prop was stock...only faster!
69.6 GPS and it had more but I backed out to keep from bouncing the wife around over a cruiser wake. Most of the porpoise issue is resolved! 5300 RPM
55~6 MPH at 3800 RPM
Thanks again Darin...Larry, Chesterfield VA
69.6 GPS and it had more but I backed out to keep from bouncing the wife around over a cruiser wake. Most of the porpoise issue is resolved! 5300 RPM
55~6 MPH at 3800 RPM
Thanks again Darin...Larry, Chesterfield VA
#70
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
mlitefan>Great news >Thanks again Larry for the Business and have a great weekend .
our e-mail address is >[email protected]
our e-mail address is >[email protected]