Removing silent choice block off plate #?
03-18-2004, 02:35 PM
#1
Charter Member #655
Charter MemberThread Starter
Removing silent choice block off plate #?
anyone know the merc part # for the block off plate? the choice has to go!
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
03-18-2004, 02:41 PM
#2
Platinum Member
Platinum Member
No But............
It's quite simple to make your own too.
The plate is probably 2" X 3"
Pull you silent choice off trace your shape of
your mounting flange along with drilling the
4 holes into a piece of 1/8 plate.
And mount it. When you pull the (Y) pipe
it has an O-ring, but I still add a little silicon
for flavor. Can't get to it once you engines
are back in.
Good Luck! If you have access to some
stainless 1/8 plate you'll have no corrosion.
Had good luck
Here
Cougarman
The plate is probably 2" X 3"
Pull you silent choice off trace your shape of
your mounting flange along with drilling the
4 holes into a piece of 1/8 plate.
And mount it. When you pull the (Y) pipe
it has an O-ring, but I still add a little silicon
for flavor. Can't get to it once you engines
are back in.
Good Luck! If you have access to some
stainless 1/8 plate you'll have no corrosion.
Had good luck
Here
Cougarman
Last edited by CougarMan; 03-18-2004 at 02:52 PM.
03-18-2004, 11:04 PM
#5
Ginger or Mary Ann?
Charter Member
Motors at least have to be moved forward to gain access to the bullhorn bolts.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
03-19-2004, 08:03 AM
#8
Charter Member #655
Charter MemberThread Starter
Originally posted by Bill 3
Let me look, I may have a blockoff plate laying around that you can have.
Let me look, I may have a blockoff plate laying around that you can have.
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
03-19-2004, 08:09 AM
#9
Registered
Join Date: Oct 2002
Location: Cincinnati, Ohio
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
If you are not concerned about weight why does the Y pipe have to be removed? I have seen several boats with caps on the tops of the Y pipes with a stainless clamp. It sure seems easier then pulling motors. Just a thought.
03-19-2004, 12:01 PM
#10
Platinum Member
Platinum Member
i totally forgot to look when I was at the shop today, I will have to look on monday. Although I am sure I have one. email or PM me your address and I will ship it monday.
