CMW

anyone have the specs on a non dry sumped 900 sc merc?

mostly interested in if it has roller lifters or not and what brand. TIA

KNOT-RIGHT

Hey you should buy a real boat.

CMW

That's My boy!

CMW

Dont tell me you put those hammers pictured in you avatar in your boat?

KNOT-RIGHT

yeah I have issues.
I have been working on these all frigin winter.

If I dont see 120 Im donating it to charity.

I hope they stay together.

CMW

you and I are too close together to not get our boats figured out. We need to collaborate our efforts!

How much Hp r u running now?

KNOT-RIGHT

Ones going to dyno next week.
hope to see a consevative 900 give or take 50
pump gas
Gonna start with some 17 x32 merc four blades

Last year N/A 600hp 5300rpm saw best of 101gps

I also went with 10 graphite cluches in the trans

CMW

only 900 hp...c'mon

with all that hardware?

we need to talk

KNOT-RIGHT

well Im figuring, and I certainly dont have the resources
you have.

Sonny Bryant cranks
corrillo rods 6.38
4.5 bore bore bowties
ross blower pistons
zero decked
full ported merlin cast iron heads
hardin seats ferra iconnel valves
mooneyham 10-71
richard lee intercoolers with whipple 24 per inch
cupranichael cores.
crane 139741 cam
Isky rollers
Isky tool room springs
Cometic gaskets
8lbs boost
850 demons

Blah blah blah

900 maybe?
We hardly ever get the water to run all out .

Most of the people I took out last year said they would never go on it again.

the wife has no Idea what I have been doing.

Clint call me anytime.
Gerry
401-255-5242

CMW

you should have way more than 900

i'm worried about the weight bias front to rear?