upper steering shaft seal
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
upper steering shaft seal
does anyone know the part # for the replacement upper shaft seal with the two plugs that u can change from the outside on a bravo one?
#2
sorry
No part #'s as I am at work...and I believe this is changed from the outside. I don't remeber off the top of my head, but I think the tiller arm has to be removed from the inside of the transom assembly. However, you need to make or use a special puller on the pin. The pin is hardened and pressed in ALUMINUM. By the time I bought the tool and did it myself and possible took a chance on busting the Al transom assembly, I figured I was money ahead to let a mechanic do it. If he broke the assembly, I'm not out huge $$$$. The job was EXPENSIVE. Something like $600. Merc thinks that pin is made of gold ( I had to replace mine and the seal). Pin was like $240. If I'd a known that, would have made my own and case hardened it myslef...
Good luck,
Zack
Good luck,
Zack
Thread
Thread Starter
Forum
Replies
Last Post
blackhawk
General Boating Discussion
1
07-28-2004 02:14 PM