Paging Cuda
04-14-2004, 11:26 AM
#1
Registered
Thread Starter
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Paging Cuda....Aqua-Buff Question
Cuda....I'm looking at getting some of that Aqua-Buff product you recommend, I need your or others imput on which one to get....the 1000 or the 2000...or maybe one of both....I have some oxidation on a small portion of the upper deck but the sides and transom are pretty good although I want to make them better....will the finer one of the two take oxidation as well?....Fred
Last edited by fred; 04-14-2004 at 01:10 PM.
04-14-2004, 02:10 PM
#2
Registered
Join Date: Nov 2003
Location: Fairhaven Ma
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Cuda and the rest of the guys recommended Aqua-Buff to me, awesome stuff.My Sutphen top deck was all chaulk and it looks like new now. Alot of work and messy, but the results are great.
04-14-2004, 03:22 PM
#3
Registered
Thread Starter
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Which one do you use....I have a small area of chalky on the upper deck around the cockpit opening the rest of the upper is non-skid....sides are shiny but want more shine...should I get 1 of the 1000 and 1 of the 2000?....Thanks, Fred
04-15-2004, 08:00 AM
#5
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it took so long to respond, I've been on the road all week.
If it's heavily oxidized, use the 1000 then follow with the 2000 and then a coat of wax. You'll be amazed at the shine, I know I was.
Here is the site. http://www.aqua-buff.com/
If it's heavily oxidized, use the 1000 then follow with the 2000 and then a coat of wax. You'll be amazed at the shine, I know I was.
Here is the site. http://www.aqua-buff.com/
04-15-2004, 08:16 AM
#6
Registered
Thread Starter
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Cuda, will the 2000 take oxidation off?....I have only a small area around the winsheild/cockpit area thats oxidized....then just want to buff sides up some more....I will probably want one bottle of each don't you think?....Thanks, Fred
04-15-2004, 10:36 AM
#8
Registered
Thread Starter
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Cuda....I'm going to order both...that way I'm covered for both conditions, let me know if there is any special way you apply or buff the stuff, Thanks again, Fred 
04-15-2004, 01:16 PM
#10
Registered
Thread Starter
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Your a lucky man Cuda....I could only wish that my wife would grab the wheel and get busy......I guess I'll just have to do it myself....I did place my order for my Aqua-Buff.... (got a couple of bottles of each)...does your wife use the spray mist of water over the stuff like the instructions say?....Thanks for any advise from you or your wife.....Fred
