Removing controls???
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
OK,
Who knows how to get this type of control out of the boat???
I assume the "stick" needs to be removed to access screws underneath???
I thought there would be a set screw or something, but cannott find anything.
Who knows how to get this type of control out of the boat???
I assume the "stick" needs to be removed to access screws underneath???
I thought there would be a set screw or something, but cannott find anything.
#2
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Rick, it looks similar to the one I took out of my old Formula. Check the very bottom for a set screw. If you don't see one, let me know and I'll uncover the boat and see if I can remember.
![Smilie](/forums/images/smilies/smile.gif)
#3
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks Cuda,
I'll check it out tonight. Am I right in thinking the Stick comes off, then the plastic cover comes off, then the thru bolts??? It has been a while. Mine is actually the older(92) stock merc one, just borrowed that photo from somewhere else. I am replacing the interior, and need to strip the old panels out that it is bolted through.
I'll check it out tonight. Am I right in thinking the Stick comes off, then the plastic cover comes off, then the thru bolts??? It has been a while. Mine is actually the older(92) stock merc one, just borrowed that photo from somewhere else. I am replacing the interior, and need to strip the old panels out that it is bolted through.
Thread
Thread Starter
Forum
Replies
Last Post
onesickpantera
General Boating Discussion
4
08-21-2007 08:20 PM