having idle problem with this cam
#1
Registered
Thread Starter
Join Date: May 2002
Location: istanbul
Posts: 1,580
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
i was expecting around 1000rpm idle but it cant work under 1500 properly, do you think this cam is hi for 1000rpm idle?
520 cu in.8-71 blown bb
520 cu in.8-71 blown bb
#3
Toxic FORMULA
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Went though the same thing with my 540's last year
Changed cams over the winter. I didn't have enough vacuum at idle to pull fuel once I put it in gear and the rpms dropped some more
.
NOTE: THESE WERE RECOMMEMDED BY COMP CAMS
![Frown](/forums/images/smilies/frown.gif)
![Mad](/forums/images/smilies/mad.gif)
NOTE: THESE WERE RECOMMEMDED BY COMP CAMS
![hot head](/forums/images/smilies/hothead.gif)
#4
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Do you have the idle set so high that the butterflies are open past the slot? I'm wondering if some carb work by one of the gurus wouldn't help.
#5
Registered
Thread Starter
Join Date: May 2002
Location: istanbul
Posts: 1,580
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
sorry bros, i worked a bit too much last week to finish this project .
problem was valve settings, fixed and everything is ok now, idles around 900rpm
thnx for ideas and help
problem was valve settings, fixed and everything is ok now, idles around 900rpm
thnx for ideas and help