kaama drives
#1
Guest
Posts: n/a
kaama drives
i am looking for info on kaama drives on 30' scarabs. i have a '77 300 w/330's and purchased a complete kaama setup w/twin disc trannys. i'm wondering how this thing is going to run, handle, dock. anyone who has owned,driven this combo? do i need to build a rocker into the hull, if so how is that done?
#2
Charter Member #232
Charter Member
Not worth trying to build rocker into the hull. That would be SO much work that it is not funny. I think that Cuda may have the books for this and may be able to help ya out with location of the drives and such.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Re: kaama drives
do i need to build a rocker into the hull, if so how is that done? [/B][/QUOTE]
Instead of building rocker into the hull, go to Arneson and buy their Rocker plates and install them for trim tabs. They will be able to give the boat much more trimming ability that the surface drives cannot accomplish.
Instead of building rocker into the hull, go to Arneson and buy their Rocker plates and install them for trim tabs. They will be able to give the boat much more trimming ability that the surface drives cannot accomplish.