????'s for IMCO shortie users
#1
VIP Member
VIP Member
Thread Starter
????'s for IMCO shortie users
I have a few questions for those
of you that have converted to
IMCO shortened lower units.
I am considering installing these
on a 29' v hull, 6800#, full hyd.
steering, that runs in the low 80's.
1. Do you have to up your prop
pitch ?
2. Being there's less gearcase in the water,
does handling suffer ?
3. Any gearcase alignment changes needed?
( toe in-toe out)
4. I assume there's a flushing attachment
made for these ???
5. And lastly, how much of a speed increase
was gained ???
jt
of you that have converted to
IMCO shortened lower units.
I am considering installing these
on a 29' v hull, 6800#, full hyd.
steering, that runs in the low 80's.
1. Do you have to up your prop
pitch ?
2. Being there's less gearcase in the water,
does handling suffer ?
3. Any gearcase alignment changes needed?
( toe in-toe out)
4. I assume there's a flushing attachment
made for these ???
5. And lastly, how much of a speed increase
was gained ???
jt