Installing Switchable Mufflers
#1
Registered
Thread Starter
Join Date: Sep 2003
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Cool](/forums/images/icons/icon6.gif)
Need some help installing Switchable Mufflers. I currently have twins in a thru hull and putting on 4.5 Teague’s. I need to know:
1) Best way to remove the 4inch exhausts hose
2) Best way to cut a larger opening & protect it from water (do I need to re-coat it with gel coat or just resin plus a primer?)
3) Wiring for the mufflers
Thanks,
Dennis
1) Best way to remove the 4inch exhausts hose
2) Best way to cut a larger opening & protect it from water (do I need to re-coat it with gel coat or just resin plus a primer?)
3) Wiring for the mufflers
Thanks,
Dennis
#3
Charter Member#157
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
![Default](/forums/images/icons/icon1.gif)
Originally posted by 88_Liberator
Need some help installing Switchable Mufflers. I currently have twins in a thru hull and putting on 4.5 Teague’s. I need to know:
1) Best way to remove the 4inch exhausts hose
2) Best way to cut a larger opening & protect it from water (do I need to re-coat it with gel coat or just resin plus a primer?)
3) Wiring for the mufflers
Thanks,
Dennis
Need some help installing Switchable Mufflers. I currently have twins in a thru hull and putting on 4.5 Teague’s. I need to know:
1) Best way to remove the 4inch exhausts hose
2) Best way to cut a larger opening & protect it from water (do I need to re-coat it with gel coat or just resin plus a primer?)
3) Wiring for the mufflers
Thanks,
Dennis
I love mine
![Smilie](/forums/images/smilies/smile.gif)
what i did to remove mine, pull twist and pull some more
![Frown](/forums/images/smilies/frown.gif)
that is the old tips anyway
![Smilie](/forums/images/smilies/smile.gif)
they were a b!tch.
However, the teagues go from the inside out. Even harder going back on since the tips have to be installed BEFORE you can put hte hoses back on.
I used a rotorzip tool to widen up my outside ports due to hte extreme angle on my setup. The inside two I used a 4" to set inside along with the 4.5 mounted on top of it to start the holes. Got that tip from OSO also.
![Smilie](/forums/images/smilies/smile.gif)
wiring was easy.
ground to the block
hot to hte soleniod. i used the one soleniod for both sets and put in an inline fuse from the battery.
do you have an unused switch in the dash?
I just reused my old silent choice switch.
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs