Trim pump flushing
#1
Charter Member#157
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
Trim pump flushing
What is the best way to bleed out the fluid in your trim pumps?
Last year one pump had a loose cap and injested some water.
It was all brown and milky.
I drained the resivor and refilled with fresh fluid, and then ran the trim to try and clean it out
but it still is milky, I want all fluid out nad new through out.
what is the easiest and possibly the cleanest way to go about this?
Last year one pump had a loose cap and injested some water.
It was all brown and milky.
I drained the resivor and refilled with fresh fluid, and then ran the trim to try and clean it out
but it still is milky, I want all fluid out nad new through out.
what is the easiest and possibly the cleanest way to go about this?
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
#2
Gold Member
Gold Member
A couple years ago I blew a hydraulic line going to one trim ram and it sucked in water.
Here's a link to a posting I did on how I flushed my system.
Flushing a Trim System
Here's a link to a posting I did on how I flushed my system.
Flushing a Trim System
The following users liked this post:
sockojr (11-16-2020)
Thread
Thread Starter
Forum
Replies
Last Post
zimm17
General Q & A
3
03-13-2007 05:23 PM
ratman
General Boating Discussion
5
01-26-2006 07:48 PM