advice on changing fuel pump/ sea water belt
05-04-2004, 08:08 PM
#3
Ginger or Mary Ann?
Charter Member
Yep, The large nut is the lock nut. The inner stud is what moves the adjustment up and down.
Loosen the lock nut, turn small bolt until belt tension is correct. While holding the small bolt with a 5/16" wrench or socket, tighten the lock nut with a 5/8" wrench.
Loosen the lock nut, turn small bolt until belt tension is correct. While holding the small bolt with a 5/16" wrench or socket, tighten the lock nut with a 5/8" wrench.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
05-04-2004, 08:32 PM
#5
Ginger or Mary Ann?
Charter Member
Any auto store. Take yours with you to match.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Thread
Thread Starter
Forum
Replies
Last Post
BillR
General Q & A
11
07-29-2022 06:31 AM
