Gas Going Up! Prices Going Down.
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Post](/forums/images/icons/icon1.gif)
GET THE EXTRA PERFORMANCE YOU WANT!
Lab finish your prop!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
satin finish> 3 blade>150.00 new or damaged
satin finished 4 blade>199.00 new or damaged
polishing add 25.00 per blade.
ACCLERATOR design add 50.00
Bravo-Rator 4bld design add 75.00
CALL, place order/
send prop in when you need to.
get 25.00 off price.
Lab finish your prop!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
satin finish> 3 blade>150.00 new or damaged
satin finished 4 blade>199.00 new or damaged
polishing add 25.00 per blade.
ACCLERATOR design add 50.00
Bravo-Rator 4bld design add 75.00
CALL, place order/
send prop in when you need to.
get 25.00 off price.
#3
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
all props received will be 5 working days in the shop ,you can always speed up shipping if you want.
in all honesty we have props there that have been there a month.
we have been buried in props,its unbelievable.
but this is driving me crazy,we are going to start working much later in the evening,we will be caught up![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
where we will be able to do the props and ship back in 3 to 4 days like last summer.WE cannot and will not have props hanging around much longer.NO MATTER WHAT IT TAKES.
Thanks very much ,Darin
in all honesty we have props there that have been there a month.
we have been buried in props,its unbelievable.
but this is driving me crazy,we are going to start working much later in the evening,we will be caught up
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
where we will be able to do the props and ship back in 3 to 4 days like last summer.WE cannot and will not have props hanging around much longer.NO MATTER WHAT IT TAKES.
Thanks very much ,Darin
#5
Registered
Join Date: Feb 2004
Location: Shelby, Ohio
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Darin,
Will these prices be good for the prop I shipped to you friday? What do you think the turn around time will be for my prop? (3 blade mirage with polished finshed converted to ACCLERATOR design ) $275.00???
Paul
Will these prices be good for the prop I shipped to you friday? What do you think the turn around time will be for my prop? (3 blade mirage with polished finshed converted to ACCLERATOR design ) $275.00???
Paul
#8
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Question](/forums/images/icons/icon5.gif)
External Warrior ,sounds good to me give me a call when your ready.
Paul/blewbyyou the above prices started on Mothers Day.
SONIC26 >Its best if you send me your number and Iwill be glad to call you,then we can PropTalk and see just what you want and need.
Thanks ,Darin
Paul/blewbyyou the above prices started on Mothers Day.
SONIC26 >Its best if you send me your number and Iwill be glad to call you,then we can PropTalk and see just what you want and need.
Thanks ,Darin
Last edited by HOUSTONPROP; 05-10-2004 at 07:19 PM.
#9
Registered
Join Date: Nov 2003
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Have you ever done a Ballistic prop? It is a somewhat thin blade to start with, and it has a squared off tip with a lift to it. I have a 2102 VIP with a new 350 MPI. I used to have a 260HP 350 in it and ran 56MPH and 4600. With the same prop and this new motor, I am running 4850rpm to 4900, and running 61mph. I am very happy with this, but always like to run as fast as possible. I have a 21P Ballistic prop now. My outdrive is about a 1.62 Alpha outdrive. I wouldn't mind running closer to 5000rpm, to get max speed, but I can't afford to lose hole shot! Don't quote me on the 1.62, but I am pretty sure. I know it isn't a 1.7 or 1.5... it is more like a 1.62 or something similar to that.
#10
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![Red face](/forums/images/icons/icon11.gif)
Yes we repair these props they also have a four bld out.
They are very hard to get the wrinkles
out after they are damaged ,but we do ,it just takes a little longer to work on them,I personally like the prop,They perform good.Call if you need to ,later Justin.
Darin
They are very hard to get the wrinkles
![EEK!](/forums/images/smilies/eek.gif)
Darin
![Embarrassment](/forums/images/smilies/redface.gif)