stuck bravo
#1
Registered
Thread Starter
stuck bravo
Friend has a bravo drive that won't come off!! the first one did,this one is stuck in the absorber?? Drive moves back 3/4 of a inch,thats all we can get. anybody know any tricks? we are soakin it know and have pressure on it,hoping it will pop off!! tripps
#2
Registered
Join Date: Feb 2004
Location: Murray,KY
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
may be the coupler is worn(elongated splines) I had a similar problem and solved it here. Had to pry it off without damaging the areas where it has O-rings. Splines on Out Drive were good but a 1" pipe would not go into coupler and it should take a 1.010" rod.
#3
Ginger or Mary Ann?
Charter Member
Is the shift cable lever releasing?
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.