Fuel Line Plumbing and Water Seperating Filters
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Line Plumbing and Water Seperating Filters
I've got the engines out of boat and am re-rigging the engine compartment. There are water/fuel seperating filters on bulkhead for ewach engine and there is a similar filter on each engine as part of EFI system.
Are the exter filters causing a reduction in fuel flow? Is the filter on engine adequite for fuel/water problem?
Would love to get rid of the filters on bulkhead since they are from the previous engine installation. Would appreciate any comments--
Poorsche
www.boatmat.com
Are the exter filters causing a reduction in fuel flow? Is the filter on engine adequite for fuel/water problem?
Would love to get rid of the filters on bulkhead since they are from the previous engine installation. Would appreciate any comments--
Poorsche
www.boatmat.com
#3
Registered
Thread Starter
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fuel Line Plumbing and Water Seperating Filters
The engines are MarinePower EFI 454 with Arizona Speed induction and ECU.
I was guessing the filters on bulkhead filters (which reamined from Mercruiser 370 TRS carb engines) needed to go and rely only on engine mounted water/fuel seprating filter.
Would appreciate confirmation.
I was guessing the filters on bulkhead filters (which reamined from Mercruiser 370 TRS carb engines) needed to go and rely only on engine mounted water/fuel seprating filter.
Would appreciate confirmation.