HELP!! SBC wont fire!
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have the motor all nice an in the boat. IT certainly has fuel and spark, but I just cant get it to light and run. It just back fires through the exhaust or carb. If I advance the timing it goes more through the carb, if I back it off I get neat flames out the pipes. I thought it may be the points so I converted the Mallory dist to electronic. I tripple checked the firing order, and timing, wtf is going on?
Last edited by Formula78; 05-21-2004 at 03:12 PM.
#2
Toxic FORMULA
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
The last time I saw that , everything was perfect
except the plug wires were in the cap backwards (wrong rotation)
.
Just a thought
![EEK!](/forums/images/smilies/eek.gif)
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
Just a thought
![crazy](/forums/images/smilies/gurn.gif)
#4
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Oh crap. That is very possible. I've been working on Fords for a long time and wired it as if the rotor rotates clockwise. Is this correct?
#5
Registered
![Default](/forums/images/icons/icon1.gif)
I think they should fire all those idiots at SBC.... Err oh... wait were talking engines.. sorry. It looks to me that you stabbed your distributer 180-deg off. BTW the roter does rotate clockwise on a SBC.
Roby
Roby
#6
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Formula78
Oh crap. That is very possible. I've been working on Fords for a long time and wired it as if the rotor rotates clockwise. Is this correct?
The rotor rotates clockwise, but cylinder numbering is different than Ford. I did this once on a Ford 460, and spent 2 days trying to figure it out, til my buddys brother figured out how much of an idiot I was, wired it like a chevy!!!!
#9
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
You guys were right!! 180 out! I just swaped the wires around and it fired right up! She sounds great!!!! As soon as I get some exhaust hose in I will put it in the water! I'll keep everyone updated as this project finishes.
#10
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Formula78
You guys were right!! 180 out! I just swaped the wires around and it fired right up! She sounds great!!!! As soon as I get some exhaust hose in I will put it in the water! I'll keep everyone updated as this project finishes.
Just Jokin'
Glad you got it goin'
Thread
Thread Starter
Forum
Replies
Last Post
bwiencek
General Q & A
10
10-22-2013 06:16 AM