Power steering question.
05-27-2004, 11:04 PM
#1
Registered
Thread Starter
Join Date: May 2003
Location: Long Island
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Power steering question.
My 36 Apache steering is very tight @ idle. Need two hands to turn the wheel.
Steering fluid is burt looking. (Latham Set up)
Someone told me I either need a Power Steering cooler or my cooler is clogged.
Question is where would I find the Power Steering cooler & what does it look like?
Steering fluid is burt looking. (Latham Set up)
Someone told me I either need a Power Steering cooler or my cooler is clogged.
Question is where would I find the Power Steering cooler & what does it look like?
05-28-2004, 09:48 PM
#2
Re: Power steering question.
If it's a Latham setup, it probably has a power steering filter. It should be between the high pressure output of the pump and the helm. Probably bolted to the front wall. That's the first thing I would check because that directly affects pump flow.
