Alpha 1 trim limit swithes ?
06-06-2004, 08:33 PM
#1
Registered
Thread Starter
Alpha 1 trim limit swithes ?
Rebuilt the trim cylinders on Alpha 1 drive and now drive only raises to about 7 o'clock and stops ..with cylinders off when bleeding they go full range ..They stop like limit switch has kicked in but trailer position switch does nothing ....I am almost positive drive should come up a few more degrees ....Adjust limit swithes ?
06-06-2004, 08:54 PM
#2
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alpha 1 trim limit swithes ?
As far as I know, the trailer button by-passes the limit switch. There may be another problem here.
06-06-2004, 09:26 PM
#3
Registered
Thread Starter
Re: Alpha 1 trim limit swithes ?
Yea.... I am thinking the trailer switch is bad ...but doesn't explain the stopping point of the drive ...maybe its all the way up ...but it seems it should go to about 8 o'clock postion ....been a while since I operated it ....
06-06-2004, 09:46 PM
#4
Registered
Join Date: Feb 2004
Location: Smith Mountain Lake, Virgina
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alpha 1 trim limit swithes ?
You Have A Faulty Wire Or Trailer Switch. As Far As The Drive Not Going As Far As It Used To Try Adjusting The Limit Switch. Caution Not To Go To High On The Trim Limit As You Will Do Damage To The U Joints. Drive The Boat First And Go By Handling And Speed Not Eye Sight On Trailer.
Gold Member
