Speedo hose location.
#1
Jerry B
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
Join Date: Sep 2003
Location: Blue Springs Missouri.
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Can someone tell me where exactly the speedo hose comes thru the inside of a Bravo One? I have a pretty bad water leak and my speedo does not work.
It looks like the leak is above the tiller arm but not sure. Time was limited to diagnos and maybe I'm just paranoid after all I have read about the seal for the upper steering shaft. Also how much water will the tiller shaft seal leak. My bilge pump comes on every 2 or three minuets. I can see a pretty good stream of water but not it's point of origin.
BTW. This is a 1993 29 foot Fountain W twin 502's Both drives are way under water when sitting.
Thanks for help in advance.
It looks like the leak is above the tiller arm but not sure. Time was limited to diagnos and maybe I'm just paranoid after all I have read about the seal for the upper steering shaft. Also how much water will the tiller shaft seal leak. My bilge pump comes on every 2 or three minuets. I can see a pretty good stream of water but not it's point of origin.
BTW. This is a 1993 29 foot Fountain W twin 502's Both drives are way under water when sitting.
Thanks for help in advance.
#2
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
The fitting is at the very top of the gimble.
Also check your bellows.
Also check your bellows.