Kokopelli

A friend is wanting to convert his single arm Commander 3000 throttle/shifter to a merc. zero effort separate throttle and shifter set up. Does anyone know if he will have to swap out cables or are his current ones compatible?

DanB

If I'm not mistaken, pretty much all cables are standard, the only thing different are the ends, and they screw on and off, so he would need an end for the zero effort, which I belive is a hook kind of deal that screws on to the end of the cable. They should come with the shifter if he is buying new.

Dan

38KV

The zero effort control require Morse 33c style cables. (First pic)
If the current cables looks like the second pic, you need the adpter kit in pic three.

Dtile

hello..Im trying to do the same but I dont see how my non 33c cable that i have will fit with the adapter pictured. i purchased a used keikekiefer zero effort and taking apart for powder. should I just take my old cable off, measure and buy the new 33c (Telflex TFXtreme Cable)...will i still need an adapter?
any help appreciated.

Mbam

Dtile, you are correct. Must use 33C style. 38KV, the adapter pictured is to convert a 33C to Merc style at the engine end.

Dtile

ok, so ill need from you (bam website i assume) two clevis control cable ends (part # 845281), and 2 cable adapter kits (from trick?)
and two new cables..
http://www.mercruiserparts.com/Show_...PAGE+2+OF+2%29

What about securing the new cable to the bracket (my bracket on has one leg)...

thanks for the replay, will be calling you when i know what i need....

Mbam

Actualy there is a Merc part number for the adapters too, I'll try and remember to post it later.

Dtile

ok i ordered the clevis (2) online, I called but you dont take orders over the phone for some reason... thanks.

phughes69

Marc, did you ever find the part number for those adapters?
I removed my old Morse throttle and am going to install the Zero Effort controls. I believe my cables are the 600A cables.

Thanks
Patrick

Mbam

Patrcik, I am not sure what a 600A is. Can you post a picture?