mcollinstn

RESTRAINT:

The straitjacket they put you in after they pry your fingers off the sticks crammed at WOT after all of the clanging and banging and sparks and smoke and fire has stopped...

articfriends

Mcollinstn,thats something i hadn't really thought of,maybe i'll put my 3.70 dia pulley on (take off 3.85) and try 32 pitch prop. I had previously tried 3.70 w/race gas and same 30 pitch and only gained .3 mph but i'm also sure it wasn't breathing enough and was past power band(picked up boost to 11 psi or so and turned 5700 instead of 5600 w/30 pitch). I had tried 32 pitch last summer w 3.85 pulley but boat was real pig,didn't make much over 7 psi boost,took forever to get to 80-81 mph,would barely go 5000 rpm's give or take 100 (it was a year ago). If i try it,i'll post the results and i'll try to have some restraint,Smitty

Kanookstr

All they needed was the rail, not the Intake. The older intakes have yellow paint on top of the runners when you remove the top plenum. The newer intakes are black. mine was a 1999 with black paint. You have to grind the intake a very little by 2 injectors, but that you can do your self.

tomcat

Kanookstr: Did you have to use the fuel rail spacers? We are doing a 1996 and they sent the rail spacers because the injectors are supposed to be higher. But the stock injectors we took off had a plastic ring on top of the body of the injector, below the O-ring, that made them the same height as the new 50 lb injectors. AZS&M says we will still need the spacers but I don't see why.

Kanookstr

Tomcat, yes I do have the spacers, and I do use them. Bu I can't tell you if the 50lb inj. were the same length as my stock 32lb were. I never checked them...