Fuel pump for a M-1 procharger on a 7.4MPI
#1
Registered
Thread Starter
Fuel pump for a M-1 procharger on a 7.4MPI
My fule pump is starting to make noise. The boat runs great but I am about to take a trip through the San Juans ( 500mi.) and I don't want any problems. I am thinking about purchasing a new fule pump that would be approprate for a prowcharger installation planned for later this year. What would I need for a 3# boost? a 5# boost? New regulator?
#5
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fuel pump for a M-1 procharger on a 7.4MPI
Aeromotive AEI-11101 from Summit $ 290.00. This is the recommended pump for MPI - Multi Port Injection motors. Works well on Carb engines too, just make sure you have a good regulator and you are dumping back to the tank.
I would install a large Water/Fuel Seperator bfore the pump and a high volume filter after the pump to protect your injectors.
I would install a large Water/Fuel Seperator bfore the pump and a high volume filter after the pump to protect your injectors.
#6
Registered
Join Date: Jun 2003
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fuel pump for a M-1 procharger on a 7.4MPI
Check our web site www.injector.com. We have a summer sale. Check out the sales. If you need something call in. Boating in Rhode Island for the week, but the shop can help you.