Greasing the drive coupler
07-01-2004, 09:32 AM
#21
Registered
Join Date: Jun 2001
Location: Michigan
Posts: 3,345
Likes: 0
Received 0 Likes
on
0 Posts
Re: Greasing the drive coupler
"2.Re-install drive and hit the zerk on the outside lower right of the gimble housing to get the gimble bearing. 1 Zerk. "....do this with out the drive installed....turn bearing by hand as you pump grease...wipe excess....grease shaft prior to install...forget greasing the coupler zirks
