Push button ignition switches
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: SE, Michigan
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
![Question](/forums/images/icons/icon5.gif)
I want to replace my ignition switches and was wondering if anyone knows if there's a company that makes aftermarket ignition switches that have one key and two push buttons? I've seen them on different stuff but can't seem to find anyone who makes them.
#2
![Default](/forums/images/icons/icon1.gif)
Try this . You can do a search on stock car products and look for the ones that cater to the dirt track .they usually do water proof
http://www.speedwaymotors.com/xq/asp...qx/product.htm
http://www.colemanracing.com/section/index.htp?id=256
this is a good company,,,http://www.daymotorsports.com/vendor/6/
These guys have a lot of stuff.high quality,,http://painlessperformance.com/togglecc.htm
here is a company that supply's a lot of Nasscar teams. Expensive$$.http://www.quickcar.net/ign_panels/ign_panels.html
Where the toggle switch is you can change over the a key switch .Make you on panel and paint it .All these company's sale just the parts
Rob
http://www.speedwaymotors.com/xq/asp...qx/product.htm
http://www.colemanracing.com/section/index.htp?id=256
this is a good company,,,http://www.daymotorsports.com/vendor/6/
These guys have a lot of stuff.high quality,,http://painlessperformance.com/togglecc.htm
here is a company that supply's a lot of Nasscar teams. Expensive$$.http://www.quickcar.net/ign_panels/ign_panels.html
Where the toggle switch is you can change over the a key switch .Make you on panel and paint it .All these company's sale just the parts
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#3
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
There is no reason why you couldn't use the stock key and add two push buttons. Boat US will have the parts you would need. The only getcha is that both engines will shut off at the same time.
#4
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
You'll want separate shutoff switches for each. You can use a single key switch to turn on and off the main 12v bus to the switchgear for theft purposes, but you'll still want separate switches to turn the juice off to each engine's systems.
Either 3 position switches (down is off, center is on, up is start and is springloaded)
Or separate toggle switches for fuel pumps, ignitions and monitoring circuitry plus a pushbutton for the starter.
No real limit. It's just circuits. You can do whatever you want.
Either 3 position switches (down is off, center is on, up is start and is springloaded)
Or separate toggle switches for fuel pumps, ignitions and monitoring circuitry plus a pushbutton for the starter.
No real limit. It's just circuits. You can do whatever you want.
#5
Registered
Thread Starter
Join Date: Jun 2003
Location: SE, Michigan
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks for the info guys, I guess i'll have to make my own panel so i get exactly what i want, I didn't even think about seperate kill switches
![EEK!](/forums/images/smilies/eek.gif)
Thread
Thread Starter
Forum
Replies
Last Post
waterboy222
General Boating Discussion
23
06-06-2007 02:11 PM
damdonzi
General Boating Discussion
28
03-06-2004 12:03 AM