Urgent! Engine stand ??
#12
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by rchevelle71
I see a little leaning going on right here too!!!!
It does not look like that piece was welded squarely. When the weight is off the stand it is square. When weight is applied it is flexing. I took the engine off the stand and set it on the floor with some wood blocks.
PHUKIN made in China! I got the stand from Northern Tools. This isn't the first time I've been disappointed with the quality of their products.
#13
Registered
Join Date: Jul 2004
Location: Guam, USA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
You have a real motor, get a real stand!
thats stand is made for those toy car motors!
Get the two legged version, you will be much happier!
Sell that one to some kid with a Toyota, tell him it has been pre stressed!
I did the same thing! you're not alone! mine said 1250 also!
Bryan
thats stand is made for those toy car motors!
Get the two legged version, you will be much happier!
Sell that one to some kid with a Toyota, tell him it has been pre stressed!
I did the same thing! you're not alone! mine said 1250 also!
Bryan
#14
Gone Fishin'
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Lean? I don't see no stinkin lean.... but then again, I've been told I'm not very level headed!!
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#15
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Dave M
Thanks Guys!
It does not look like that piece was welded squarely. When the weight is off the stand it is square. When weight is applied it is flexing. I took the engine off the stand and set it on the floor with some wood blocks.
PHUKIN made in China! I got the stand from Northern Tools. This isn't the first time I've been disappointed with the quality of their products.
It does not look like that piece was welded squarely. When the weight is off the stand it is square. When weight is applied it is flexing. I took the engine off the stand and set it on the floor with some wood blocks.
PHUKIN made in China! I got the stand from Northern Tools. This isn't the first time I've been disappointed with the quality of their products.
When it comes to tools and machine shop items, you get what yu pay for, BUY AMERICAN!
SAR
#16
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by bpine
thats stand is made for those toy car motors! Sell that one to some kid with a Toyota, Bryan
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Roby
#17
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
LMAO
There aint no 1250lb stand in the world with 3 legs. I use a stand like that to assemble the short block only then transfer it to a summit rolling floor caddy. you can put everything on accept the rear bell housing and you can run them right on the stand. I break the cam in on one and it great to be able to check for any leaks I will try to get a pic tomarow.
P.S.get that thing off that stand soon, I'm getting the fingernails on the blackboard shivers when I look at it!
![Big Grin](/forums/images/smilies/biggrin.gif)
There aint no 1250lb stand in the world with 3 legs. I use a stand like that to assemble the short block only then transfer it to a summit rolling floor caddy. you can put everything on accept the rear bell housing and you can run them right on the stand. I break the cam in on one and it great to be able to check for any leaks I will try to get a pic tomarow.
P.S.get that thing off that stand soon, I'm getting the fingernails on the blackboard shivers when I look at it!
#19
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I have 5 of the cheap stands,i re-inforced all of them with a few dollars worth of metal and welded them together were they normally bolt to make them sturdier,Smitty
#20
Registered
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
You just need to stay away from the cheap Chinese crap. It sure does`nt look like a 1250# capacity stand to me.
Just think about this the next time you get underneath a vehicle that you raised with a chinese jack and have setting on chinese jack stands.
Just think about this the next time you get underneath a vehicle that you raised with a chinese jack and have setting on chinese jack stands.