Drive not going down
10-13-2004, 06:50 PM
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Mahomet, IL
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
Drive not going down
On a 2000 Checkmate 259 Convincor (454 MAG EFI/Bravo One with 140 hours) the drive no longer wants to go into the complete down position. Anyone ever have this problem with a Bravo One Drive?
10-13-2004, 08:28 PM
#2
Registered
Re: Drive not going down
Yes, it can happen if air or fluid is trapped in the trim cylinder behind the ram. This is provided the trim pump is working. Loosen the hydraulic hose on the ram ( the one on top of the rams). When loosened, push the drive down and fluid or air should bleed out, then retighten the hose fitting. This should correct the problem, but be sure the trim pump is full first. The process may need to be repeated several times. This worked for me.
If this is the problem, I would be concerned how it happened and what is leaking... or did the reservoir run dry??
If this is the problem, I would be concerned how it happened and what is leaking... or did the reservoir run dry??
Thread
Thread Starter
Forum
Replies
Last Post
Canada Jeff
Drives and Lower Units
10
07-19-2007 02:38 PM
thayes11
General Q & A
0
10-02-2005 12:36 PM
Velocity Tom
General Boating Discussion
4
07-16-2003 10:13 AM
panteraracin
General Q & A
3
02-07-2002 10:36 PM
