cam help: 502 with AFR 305cc heads
#141
Registered
Re: cam help: 502 with AFR 305cc heads
WAGS,
Just wanted to clarify----are you saying that your engine(s) were dyno tested with GIL exhaust manifolds/tailpipes??? Thanks
Just wanted to clarify----are you saying that your engine(s) were dyno tested with GIL exhaust manifolds/tailpipes??? Thanks
#143
Platinum Member
Platinum Member
Thread Starter
Re: cam help: 502 with AFR 305cc heads
Kamma,
yes we did run the Gil exhaust on the dyno, I have a set of dry "dyno" pipes to avoid the mess from all the water flying around. I had all the accesories running, sea pump, circulating pump, and alternator. I tried to duplicate the way it would be in the boat. I felt running headers would be a waste of time just to get a false and inflated number. Good luck with your project. Jeff
yes we did run the Gil exhaust on the dyno, I have a set of dry "dyno" pipes to avoid the mess from all the water flying around. I had all the accesories running, sea pump, circulating pump, and alternator. I tried to duplicate the way it would be in the boat. I felt running headers would be a waste of time just to get a false and inflated number. Good luck with your project. Jeff
#144
Registered
Join Date: Nov 2004
Location: Fairport Harbor OH
Posts: 2,423
Likes: 0
Received 0 Likes
on
0 Posts
Re: cam help: 502 with AFR 305cc heads
Jeff, congrats on completing the project. I guess you've paved the way once again
And just when we were getting close..............
Can't wait to see it perform this summer.
Hope you can come over and check out the progress on the boat this weekend....we'll be living there for a while.
And just when we were getting close..............
Can't wait to see it perform this summer.
Hope you can come over and check out the progress on the boat this weekend....we'll be living there for a while.
Thread
Thread Starter
Forum
Replies
Last Post
cloudmaster_321
Do It Yourself, Boating on a Budget
13
09-08-2008 01:15 AM