head gaskets, which ones??
#13
Registered
![Default](/forums/images/icons/icon1.gif)
Anyone ever try thinner head gaskets on non-blown engines. You can increase compression by taking off 20-30 thousands by using thinner stainless gaskets. Easier than shaving the heads, and you can switch back. You need perfect head and block machining I would think.
#14
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Feb 2003
Location: Brookfield, WI
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Preformance Gaskets out if Wisconsin, Owner is Bob Eineichner. Phone # 1-262-677-4690.
Use his gaskets, they have been tested beyond belief. A major player in marine motors along with 90% of the east coast guys use his products. Look for Bob and I at Keywest starting on Thursday. Any questions on the products we will be more than happy to help you. We will be hanging with the Mercury guys.
Little Tommy.
Use his gaskets, they have been tested beyond belief. A major player in marine motors along with 90% of the east coast guys use his products. Look for Bob and I at Keywest starting on Thursday. Any questions on the products we will be more than happy to help you. We will be hanging with the Mercury guys.
Little Tommy.