Hustler 500efi engine tear down & Build Up
#281
Rob
VIP Member
Thread Starter
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by Linster
How can you sleep at night knowing the MSD wires are hanging on the back of the engine? I would pull both motors and start over!
JK!!
They look great.
JK!!
They look great.
I just got some smaller pullys for the blower.
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#282
Off the Radar
Platinum Member
Join Date: May 2001
Location: Short Pump or Colonial Beach, VA
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by Strip Poker 388
Thanks Linnie .I know I am going to shorten them they must be 5 foot long.theres a bunch of wires back there I am going to change the plug wires also,there 4 years old.Thinking about some valve covers too.
I just got some smaller pullys for the blower.
Rob
I just got some smaller pullys for the blower.
Rob
#283
Rob
VIP Member
Thread Starter
#284
Rob
VIP Member
Thread Starter
Re: Hustler 500efi engine tear down & Build Up
leek down before tear down #2
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#287
Rob
VIP Member
Thread Starter
#289
Rob
VIP Member
Thread Starter
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.