Hustler 500efi engine tear down & Build Up
#44
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
does anyone know the flow numbers on these stock retangular port heads?? does any one have a flow sheet??
#45
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by WAGS382
Strip,
Your garage looks alot like mine, a couple merc 500's and a 70 chevelle. Boat looks great, keep us posted.
Your garage looks alot like mine, a couple merc 500's and a 70 chevelle. Boat looks great, keep us posted.
![Big Grin](/forums/images/smilies/biggrin.gif)
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#46
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Linster
Strip
I have a friend of mine putting new pistons in his 500's. He has the original small pop ups that will be 8.75 CR if you need them. He will have 16 of them. The original ones use a metric low tension ring. Scroggin Dickey in Texas sells a standard tension replacement metric ring set if you go that way. Also there a set of pistons in the classified section.
I am not familiar with the Eickert oil system. I just noticed it was not the Merc stuff.
I am more than likely going to make 540 EFI's out of mine. The Whipple also looks good now. 725HP will not be friendly on the drives.
I have a friend of mine putting new pistons in his 500's. He has the original small pop ups that will be 8.75 CR if you need them. He will have 16 of them. The original ones use a metric low tension ring. Scroggin Dickey in Texas sells a standard tension replacement metric ring set if you go that way. Also there a set of pistons in the classified section.
I am not familiar with the Eickert oil system. I just noticed it was not the Merc stuff.
I am more than likely going to make 540 EFI's out of mine. The Whipple also looks good now. 725HP will not be friendly on the drives.
![Big Grin](/forums/images/smilies/biggrin.gif)
I do think the CR is down because of the Blower pistons so that should be the cause of the mph difference from the factory test report. we'll see??
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#47
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by jt29olhp500s
So.........I'm not the only one who has found an
" alternative duty" for a forklift
Your right........it takes more time getting all the
stuff bolted to them off, than it does to get em out.
How are the lifters ?
I'm right in the middle of doing a pair of HP500's,
that had a lifter failure ( broken roller ), so, these pictures
kind of hit close to home.
Keep the pic's coming.......It's going to be a loooong winter up here.
jt
" alternative duty" for a forklift
![Big Grin](/forums/images/smilies/biggrin.gif)
Your right........it takes more time getting all the
stuff bolted to them off, than it does to get em out.
How are the lifters ?
I'm right in the middle of doing a pair of HP500's,
that had a lifter failure ( broken roller ), so, these pictures
kind of hit close to home.
Keep the pic's coming.......It's going to be a loooong winter up here.
jt
![Big Grin](/forums/images/smilies/biggrin.gif)
The lifters look ok ,looks to have some water stains from sitting up . I have not felt the rollers yet ,but I plane on replacing them anyway, good insurance .these only had 180 hours on them , I am real easy on parts early in the day,until
![Drink](/forums/images/smilies/drink.gif)
![Drink](/forums/images/smilies/drink.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Winter has;nt even started here , the last 2 Sundays we have been going drag racing ,but it looks like rain this weekend
![Mad](/forums/images/smilies/mad.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Articfriends before OSO and computers I stayed in the garage playing . I guess thats my down fall
![Big Grin](/forums/images/smilies/biggrin.gif)
iamfaster you might have to wait, don't get DT's
![Drink](/forums/images/smilies/drink.gif)
Open 72 go back to work and quite looking in the background
![Drink](/forums/images/smilies/drink.gif)
fountain_333 These heads have a LITTLE port work done to them , I am going to have them flowed just to see the #s,This may give you an idea on what the do.
Lou I will get you some pictures of that oil change system I made.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#48
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ck out the odd ball cam bolt
no lock tite
Does this timing chain look like a stock 500efi??
It had some slack so I will prob put a cloyds hex-a-just in it.
The KE oil thermostat kit, remote adapter with steel RUSTING fittings . I will change them out.
![EEK!](/forums/images/smilies/eek.gif)
Does this timing chain look like a stock 500efi??
It had some slack so I will prob put a cloyds hex-a-just in it.
The KE oil thermostat kit, remote adapter with steel RUSTING fittings . I will change them out.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#49
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Rod bearing in #1 motor , its 3 different name brands
Michigan 77,Clevite cp743p,FM-7200ch.
The 77 had a large chamfer [for a stock crank.WHY?]
I understand sometimes you mix up bearings to get the right clearance, But 3 different ones
I have bought the under or over size bearing and used just half of it to come up the that special clearance ,But
Look at the 3rd pick on the chamfer , lot of rod not supported
![EEK!](/forums/images/smilies/eek.gif)
The 77 had a large chamfer [for a stock crank.WHY?]
I understand sometimes you mix up bearings to get the right clearance, But 3 different ones
![EEK!](/forums/images/smilies/eek.gif)
![EEK!](/forums/images/smilies/eek.gif)
Look at the 3rd pick on the chamfer , lot of rod not supported
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#50
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Laz here is the pick on the balancing holes , small drill bit. The # 2 motor the crank has regular size holes on it .On the pistons On both motors there is no balancing marks in them??
What you think??
I figure I will get it rebalanced just for the hell of it . to make sure!!
What you think??
I figure I will get it rebalanced just for the hell of it . to make sure!!
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.