Trailer Brakes ?
#11
Registered
Thread Starter
Join Date: Jan 2003
Location: FINGER LAKES N.Y.
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trailer Brakes ?
formula31, your trailer may not have backing plates , but if you look there should be a small square plate welded to your axle with four holes where they can be added.
#13
Forum Regulator
VIP Member
Re: Trailer Brakes ?
Well, that sucks if that is the case. My axles had them. My new 3500lb axles were about $200 a peice, made by Quality Axle I think.
Might talk to a local semi-truck trailer repair place. They may can add on the plates.
Might talk to a local semi-truck trailer repair place. They may can add on the plates.
#14
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trailer Brakes ?
Originally Posted by formula31
No, that is the part that I dont have. I mis-described what I was asking. That small square plate is what is not there.
FYI, the drum brake assemblyies are standard; there is no marine versions. I bought 2 replacements for about $80. Pull the 4 bolts and brake line, bolt up the new, adjust and bleed the lines. Viola', done.