Wiring Harness help Where can I get one
#11
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Ed
Don't know if you need the "keyswitch harness's" or not, but they are the same whether you have a carb or efi motor. These are the harness's that run from the dash back to the motor...and then plug into the engine harness. The keyswitch harness's are the same for every Mercruiser V-8 inboard or sterndrive, regardless of size. Ed
I am in need of Motor Harnesses and I have heard most of them interchange as well.
#12
Registered
Join Date: Feb 2004
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Leathl_WS6
Cdog I tried to send you a PM but it said you can't receive them.
Anyhow is it complete with the breaker assembly? How much. Let me know you can call me at 440-315-5733
Anyhow is it complete with the breaker assembly? How much. Let me know you can call me at 440-315-5733
It is just the harness that allows the mercury boat harness or quicksilver harness to plug right in. You can buy the breaker as a seperate purchase. I bought mine at Eddie Marine but any mercury shop will have them for 20-30 bucks. The breaker assm. is not included when you order a wiring harness from a Mercury dealer.
#13
speel chekk this fokker!
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!