XR Top Cap
#21
Platinum Member
Platinum Member
Re: XR Top Cap
The replacement caps that I have are aluminum. I was going to use the drive showers with the replacement caps. I know I would have to put another hole in the cavitation plate but the Simrek requires that too.
#22
Registered
Re: XR Top Cap
According to Mr. Gadgets the Merc ITS top cap looks to be a much better casting process as far as he could see with his eye. This of course is in comparison to the Merc standard top cap.
#26
VIP Member
VIP Member
Re: XR Top Cap
KAAMA
are you using drive shafts or imco shafts in your boxes
thanks
are you using drive shafts or imco shafts in your boxes
thanks