Edelbrock Marine Heads
#12
Registered
Join Date: Jan 2001
Location: elyria ohio usa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I switched from g.m. rectangle to eldebrock marines and performer r.p.m.s last year.....ported the heads,gained 1 point compression and reliabilty of inconel exhaust.....package is 150# lighter, runs alot better, but gained only about 3m.p.h. on a heavy 37' boat alot of work, but not much of a gain Ken
#14
Registered
Join Date: Oct 2003
Location: Ballston Spa, New York
Posts: 531
Likes: 0
Received 12 Likes
on
10 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by blue thunder
Switching from the iron gm heads to edelbrock rect port should net you 70hp/80tq at 5000rpm. Great investment for $1,500. Plus you will have all new good valves and springs. I run these heads and think they are the best choice for shoestring budget guys like me that only want to make 500-550 hp. If this is you, go for it. I would leave the cam alone for now.
BT![Cool](/forums/images/smilies/cool.gif)
BT
![Cool](/forums/images/smilies/cool.gif)
#15
Registered
Join Date: Jan 2001
Location: elyria ohio usa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by john.sblendorio
Ken - what kind of boat?
#16
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by splashandburn
Will switching JUST the heads really get you an extra 70hp/80tq??
BT
![Cool](/forums/images/smilies/cool.gif)
Last edited by blue thunder; 01-07-2005 at 03:56 PM.
#18
Registered
Join Date: Jan 2003
Location: Broken Arrow, OK
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I was surprised at the power they made for me. 742 Hp with 2-3 lbs of non intercooled roots blower boost. Gasket matched only. 522 CID
Not my first choice for N/A engines by any means. Great bargain.
Flatlander advertises them for 1,299 but I have yet to find them in stock there.
Not my first choice for N/A engines by any means. Great bargain.
Flatlander advertises them for 1,299 but I have yet to find them in stock there.
#19
Registered
Join Date: Jul 2003
Location: st charles mo
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Bigwavz
Is anybody using the Edelbrocks?? I was looking at them for my blown 502's. Does anybody have any flow numbers on these heads??
#20
VIP Member
![Default](/forums/images/icons/icon1.gif)
amer3-
You are not setup to receive private messages on this board. I would appreciate any info you might have on the Edelbrock heads. Are you currently running them??
My email is [email protected]
Thanks
Dave
You are not setup to receive private messages on this board. I would appreciate any info you might have on the Edelbrock heads. Are you currently running them??
My email is [email protected]
Thanks
Dave
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com