Parts Needed
#1
Registered
Thread Starter
Parts Needed
I am looking for 4 of the rubber bushings that attach the bravo flywheel housing to the inner transom plate. Anyone have them laying around or know a good source. mercruiserparts.com states they are no longer available.
Two 454 Flywheels(assuming an automotive flywheel will not work)
Also looking for two metal dust covers for the flywheel housing.
Thanks
Two 454 Flywheels(assuming an automotive flywheel will not work)
Also looking for two metal dust covers for the flywheel housing.
Thanks
Last edited by Prater; 01-25-2005 at 09:48 PM.
#3
Registered
Re: Parts Needed
Just bought two sets at the corner Merc dealer. They are taller than the old ones but otherwase the same. May have a new part number.
Do you need an entire bellhousing? I have an extra brand new one I'd sell.
PM me if so.
Do you need an entire bellhousing? I have an extra brand new one I'd sell.
PM me if so.
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Parts Needed
There is a replacment kit, elimimates the use of the old spring washers, you need 1 kit per engine. Part number is 865329A02, we sell them online for $29.53 per kit (and have them on the shelf).
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Registered User
Join Date: Sep 2002
Location: hammonton N.J.
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parts Needed
Originally Posted by Prater
I am looking for 4 of the rubber bushings that attach the bravo flywheel housing to the inner transom plate. Anyone have them laying around or know a good source. mercruiserparts.com states they are no longer available.
Two 454 Flywheels(assuming an automotive flywheel will not work)
Also looking for two metal dust covers for the flywheel housing.
Thanks
Two 454 Flywheels(assuming an automotive flywheel will not work)
Also looking for two metal dust covers for the flywheel housing.
Thanks
#8
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Parts Needed
Sorry, I gave the wrong part number before, 865330A02, will post a picture of the kit in a few.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#9
Re: Parts Needed
Originally Posted by Mbam
There is a replacment kit, elimimates the use of the old spring washers, you need 1 kit per engine. Part number is 865329A02, we sell them online for $29.53 per kit (and have them on the shelf).
This new kit sounds like something to upgrade to.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#10
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Parts Needed
The spring gave the rear of the engine some "give", but usually wound up collapsed anyhow. The new mount (used on all the new engines) is taller and eliminates the spring washer.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired