454mag rebuild in progress
03-17-2005, 07:56 AM
#71
JC Performance Engines
Gold MemberThread Starter
Re: 454mag rebuild in progress
Dyno coming soon.
Thing is, after I dyno, the engine is going into the boat.
And I prefer not to have the engine out in the cold snow.
So... dyno will be probably in 2 weeks.
Plus I still have some riggin in the boat to do.
Thing is, after I dyno, the engine is going into the boat.
And I prefer not to have the engine out in the cold snow.
So... dyno will be probably in 2 weeks.
Plus I still have some riggin in the boat to do.
03-17-2005, 08:15 AM
#72
Registered
Platinum MemberJoin Date: Dec 2003
Location: Metairie,La
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Re: 454mag rebuild in progress
That other motor is a Ford with a Danny Bee belt drive.Looks like a C and C Motor sports Al block.Probably will have a C-460 or Blue thunder heads?
04-05-2005, 03:01 PM
#73
JC Performance Engines
Gold MemberThread Starter
Re: 454mag rebuild in progress
OK, getting closer. Looking to dyno by early next week. Maybe even end of this week... but i'll have to cross my fingers for that.
04-05-2005, 08:30 PM
#74
Registered
Re: 454mag rebuild in progress
Storm, looks great I'll have to post some of my 454 mag rebuild. Question where did you get the cap for the power steering reservoir? Eric
04-06-2005, 07:42 AM
#75
JC Performance Engines
Gold MemberThread Starter
Re: 454mag rebuild in progress
Eric, if you mean this... its IMCO.
You should be able to read the cap if you open the pic.
You should be able to read the cap if you open the pic.
Last edited by Stormrider; 04-06-2005 at 07:45 AM.
04-19-2005, 02:31 PM
#79
VIP Member
VIP Member
Re: 454mag rebuild in progress
Great to meet up with you last Saturday Storm.
Good Luck with the testing!
We want to hear the numbers please...
Good Luck with the testing!
We want to hear the numbers please...
__________________
Patrick
Patrick
