Looking for Fuel injection.
#2
Registered
Re: Looking for Fuel injection.
Blown,
I have an MPI system from a 502 415 Horse Merc for sale-don't know if it is compatable with the L-29. I'm open to offers. It has about 80 hours and is in mint condition.
Bob G.
I have an MPI system from a 502 415 Horse Merc for sale-don't know if it is compatable with the L-29. I'm open to offers. It has about 80 hours and is in mint condition.
Bob G.
#3
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Fuel injection.
I have one from my 2000 7.4 MPI but not turn-key and not stock.
It's got 42lb injectors from an HP500, ECU is reprogrammed (by Tyler Crockett) for head work and cam and has K&N flame arrestor. The harness is not complete. According to bobl (who built my new motor and did all the work in the 7.4 AND all this at his shop) the harness could be put back together by someone that knows what they are doing with it. I decided to have him just use what he could from it for the new motor vs. buying a new harness thinking the MPI system would not be something that would be in real demand.
It's all in great condition if it's something you could use. If that will work for what you need, PM me.
Also have the stock exhaust with 3" risers.
(Oh, also have the block with 7 good cylinders, rod's, pistons and crank. #1 cylinder has seen better days. )
It's got 42lb injectors from an HP500, ECU is reprogrammed (by Tyler Crockett) for head work and cam and has K&N flame arrestor. The harness is not complete. According to bobl (who built my new motor and did all the work in the 7.4 AND all this at his shop) the harness could be put back together by someone that knows what they are doing with it. I decided to have him just use what he could from it for the new motor vs. buying a new harness thinking the MPI system would not be something that would be in real demand.
It's all in great condition if it's something you could use. If that will work for what you need, PM me.
Also have the stock exhaust with 3" risers.
(Oh, also have the block with 7 good cylinders, rod's, pistons and crank. #1 cylinder has seen better days. )
#5
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Fuel injection.
Originally Posted by blownboat
What do you guys think I could pay for a complete 502 mag or 454 that someone took out,I didnt see any in the clasifieds!
Last edited by SeaRay Jim; 02-06-2005 at 06:22 PM.
#6
Registered
Join Date: Oct 2000
Location: Sussex, WI
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Fuel injection.
Blown boat, I'm pulling a pair of 502efis out of my boat early spring, just in the process of deciding what I 'm going to replace them with right now. If you have any intrest you can reach me at 262 820 0782. Just not sure if I'm going to need some of the accessories for the new motors or not.I'm probably looking at selling them complete for about 3500.00. each.
#7
Registered
Join Date: Jan 2003
Location: Sparta
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Fuel injection.
Rons, I might be interested in one of those 502, depending on hours/condition. I don't need your front accesories or your bellhousing. Let me know [email protected]
Thanks Jamie
Thanks Jamie
#8
Registered
Join Date: Jan 2005
Location: lorain ohio
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Fuel injection.
i have 2 efi setups for 454 mags. from intakes up. including mefi ecu's. excellant condition all you need is wiring harness as i changed to the f.a.s.t ecu's. i can sell these also if interested and wiring harness that i have will fit these . includes electric fuel pumps as well. no cool fuel system. might need a couple of fuel fittings but that's about it. john
#9
Registered
Re: Looking for Fuel injection.
A friend of mine has two complete EFI set ups for sale off a '96 or '97 fountain. They are low hour fresh water pieces off 502 mags. Everything is there even the camshafts, and roller lifters. They are at Shipwreck Marine in Detroit. The telephone number is (313) 824-0300. Ask for Joanne, and tell her you are asking about Art's EFI's