Bravo- engaging while in neutral
#1
Registered
Thread Starter
Join Date: Nov 2000
Location: Sevierville,TN
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
![Question](/forums/images/icons/icon5.gif)
Bravo/Quicksilver 3000 Series remote (1995)
Fine at idle but when I push shift lever release button and idle up in neutral (with lever forward) drive engages in forward.
If I push shift lever release button and idle up toward reverse- no problems.
I've cleaned and greased the detent ball (rear cap of drive) and adjusted shift cables
Thanks
Fine at idle but when I push shift lever release button and idle up in neutral (with lever forward) drive engages in forward.
![EEK!](/forums/images/smilies/eek.gif)
If I push shift lever release button and idle up toward reverse- no problems.
I've cleaned and greased the detent ball (rear cap of drive) and adjusted shift cables
![Mad](/forums/images/smilies/mad.gif)
Thanks
Last edited by RickR; 02-09-2005 at 03:33 PM.
#2
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I think those were recalled for that problem. It is very dangerous and you need to get rid of it ASAP
#3
B-MAX REPAIR
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
You Need To Check Shifter Unit. ( Under Hatch) There Is A Plastic Set Gauge Too Set The Throw Disstance Correctley. It's Very Usefull When You Are Guessing At The Setting On The Shifting Unit.
Thread
Thread Starter
Forum
Replies
Last Post
hoozeyurdaddy
Drives and Lower Units
1
06-30-2007 09:10 AM