Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
#1
Registered
Thread Starter
Join Date: May 2002
Location: Deeee-troit!
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
This conversation started over on my Best way to make 600hp? thread, but I thought it deserved a thread of its own.
Who can give the skinny on Mercury motors over the years? Displacement, horsepower, years used, and any other information that might be useful. If we get enough responses, I'll throw them all in a spreadsheet and put it up on the web somewhere. Might help someone when they are shopping for an older boat.
Who can give the skinny on Mercury motors over the years? Displacement, horsepower, years used, and any other information that might be useful. If we get enough responses, I'll throw them all in a spreadsheet and put it up on the web somewhere. Might help someone when they are shopping for an older boat.
#3
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Let's see, for the Mark IV, Gen V carbed 454s
330 TRS 1977-81 Merc Trans
330 TRS 1982-87 BW Trans
370 1979-87 (predecessor to 454 Mag)
454 Magnum (7.4 Magnum) Alpha 1986-88
7.4/330 1988- Bravo
340 inboard 1981-1987
454 Magnum (365hp) Bravo 1988-97
400 cyclone 1980-86
420 & 425 1987-93
475 Turbo 1981-85
525SC 1991-96
450 (roller cam) 1995
330 TRS 1977-81 Merc Trans
330 TRS 1982-87 BW Trans
370 1979-87 (predecessor to 454 Mag)
454 Magnum (7.4 Magnum) Alpha 1986-88
7.4/330 1988- Bravo
340 inboard 1981-1987
454 Magnum (365hp) Bravo 1988-97
400 cyclone 1980-86
420 & 425 1987-93
475 Turbo 1981-85
525SC 1991-96
450 (roller cam) 1995
#4
VIP Member
VIP Member
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
If anyone cares about the HP smallblocks ,
here's a few.
280 TRS 350 c/i of the 70's and early 80's
300 Tempest 350 c/i 83'-86'
320 EFI 350 c/i 87'-89'
377 Scorpion/ black scorpion 377 c/i 96'-04'
here's a few.
280 TRS 350 c/i of the 70's and early 80's
300 Tempest 350 c/i 83'-86'
320 EFI 350 c/i 87'-89'
377 Scorpion/ black scorpion 377 c/i 96'-04'
#5
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Dont forget the 86 collection
MCM 400 Cyclone
MCM 420 became the HP 420
MCM 440 Cyclone
MCM 460 Cyclone which was a 468 cu/in
and the
MCM 575 became the HP 575 was a 540 cu/in Had solid lifters
MCM 400 Cyclone
MCM 420 became the HP 420
MCM 440 Cyclone
MCM 460 Cyclone which was a 468 cu/in
and the
MCM 575 became the HP 575 was a 540 cu/in Had solid lifters
#6
Registered
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Originally Posted by formula31
Dont forget the 86 collection
MCM 460 Cyclone which was a 468 cu/in
MCM 460 Cyclone which was a 468 cu/in
#7
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Originally Posted by KAAMA
I believe (at least I am pretty sure) the Merc 460hp, had a 4.25" stroker crankshaft which made it a 482cid engine.
#8
Registered
VIP Member
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Does anybody remember the 482's from the 1970s called the "Tornado" It said "Competition Powerplant" on the sticker on the valve cover. I think these were 12:1 motors we used in Open class. We could bore them to 496's and still stay under the 1,000 cu. in. limit we had back then.
I think we were getting 680 hp at 5,200 RPMs, where we ran most of the race. Then, after we burned off some weight, I would kick them up to 5,700 if we could improve our position.
Those were the days!
I think we were getting 680 hp at 5,200 RPMs, where we ran most of the race. Then, after we burned off some weight, I would kick them up to 5,700 if we could improve our position.
Those were the days!
#9
Registered
Join Date: Jan 2001
Location: Holland MI
Posts: 3,140
Likes: 0
Received 0 Likes
on
0 Posts
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
There were two different 400 engines available, the 400 and the 400 Cyclone.
400 had stock rockers with stamped steel valve covers while the 400 Cyclone had roller rockers with finned aluminum covers and Cyclone tags riveted in the middle.
400 had stock rockers with stamped steel valve covers while the 400 Cyclone had roller rockers with finned aluminum covers and Cyclone tags riveted in the middle.
#10
Registered
Join Date: Jun 2004
Location: Lexington, SC / Lake Murray
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: Calling all oldtimers, er, "experienced boaters" - Merc motors over the years
Originally Posted by Gary Anderson
Let's see, for the Mark IV, Gen V carbed 454s
330 TRS 1977-81 Merc Trans
330 TRS 1982-87 BW Trans
370 1979-87 (predecessor to 454 Mag)
454 Magnum (7.4 Magnum) Alpha 1986-88
7.4/330 1988- Bravo
340 inboard 1981-1987
454 Magnum (365hp) Bravo 1988-97
400 cyclone 1980-86
420 & 425 1987-93
475 Turbo 1981-85
525SC 1991-96
450 (roller cam) 1995
330 TRS 1977-81 Merc Trans
330 TRS 1982-87 BW Trans
370 1979-87 (predecessor to 454 Mag)
454 Magnum (7.4 Magnum) Alpha 1986-88
7.4/330 1988- Bravo
340 inboard 1981-1987
454 Magnum (365hp) Bravo 1988-97
400 cyclone 1980-86
420 & 425 1987-93
475 Turbo 1981-85
525SC 1991-96
450 (roller cam) 1995
This is awesome information. Thanks for sharing all !!