Revolution marine exhaust ?
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: st.clair shores Mi.
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Revolution marine exhaust ?
Has any one had good luck with these? How do they compare?
I have 454 and trs. n/a I kneed an exhaust system I don"t want To run a dry system. I am in fresh watter. cam duration 226 in 236 exh lobe 112...
should be close to 480 hp.
I am looking to try to save some of the budget but i don't want to have to buy a new exhaust every few years. OR ever again hopefully. Do it right the first time.
Looking for some opinions
thanks for the help
Tom
I have 454 and trs. n/a I kneed an exhaust system I don"t want To run a dry system. I am in fresh watter. cam duration 226 in 236 exh lobe 112...
should be close to 480 hp.
I am looking to try to save some of the budget but i don't want to have to buy a new exhaust every few years. OR ever again hopefully. Do it right the first time.
Looking for some opinions
thanks for the help
Tom
#3
Re: Revolution marine exhaust ?
I put a set on last spring. Substantial improvement in midrange, little if any gain at WOT. in. 224 ex. 234, LSA is 110 {ZZ502/502} and no known or signs of reversion. As far as an after market manifold/riser set up they're probably as good as the rest. Good deal for the $.
#4
Registered
Join Date: Jan 2005
Location: Lake Champlain
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Re: Revolution marine exhaust ?
I too have purchased a set of the revolution Marine exhaust. I am very happy with them. I had the "old Mercruiser" on one engine and osco's on the other. These are definately an improvement. The weight of the aluminum ones are sooo much nicer. I have stock 365 magnum cams. I do not know the spec's. The performance increase is most notable in the mid range. The folks at revolution are very helpful. Their guaruntee / customer service was excellent from my experience.
Quikdecion.
Quikdecion.
#5
Charter Member #927
Charter Member
Re: Revolution marine exhaust ?
Fred, there was a Hot Boat article a few years ago comparing a bunch of different exhausts systems. But, I don't think the REMs were out yet.
#7
Platinum Member
Platinum Member
Re: Revolution marine exhaust ?
Stainless Marine has some of the nicest stuff out there. I just bought 2 sets from Trick and couldn't be happier. They weigh half as much as my old Gils, are a better design, come with a 5 year warranty, and have a place to put zincs.
#10
Registered
Re: Revolution marine exhaust ?
Ive seen a set of polished Rev Marine manifolds ....real nice piece.......do a search ....Im sure some guys were saying they got some good gains from them......word of caution.....make sure when your pricing you price with all reqd brackets, adapters, bolts etc......it can really make a difference