X dimension on a Baja H2X???
#11
Charter Member #601
Charter Member
Thread Starter
Re: X dimension on a Baja H2X???
Thanks guys,
Stever, it looks like a very nice setup. The guy that I am building the drive for is running a 600" motor at around 700hp. Very mild for it' size. He may later Procharge it. So the offer for the turn key is appreciated, but...
Trevor,
I will check that url..
Bailey, could you check to see what your X is, so we can compare? Or maybe a phone number I could talk to Lloyd, sounds like he has played with them and knows what can and cant be done..
Thanks again guys..
Dick
Stever, it looks like a very nice setup. The guy that I am building the drive for is running a 600" motor at around 700hp. Very mild for it' size. He may later Procharge it. So the offer for the turn key is appreciated, but...
Trevor,
I will check that url..
Bailey, could you check to see what your X is, so we can compare? Or maybe a phone number I could talk to Lloyd, sounds like he has played with them and knows what can and cant be done..
Thanks again guys..
Dick
#12
Registered
Re: X dimension on a Baja H2X???
Dick,
My buddy that had the Stellings setup (goes by EWB here) had the coolest setup I ever saw on a H2X, and his was faster than mine.
I would try to PM him, and I'll tell him about this thread. Lloyd Burns is a very sharp, nice guy, and can probably give you X dimensions off the top of his head. If you talk with him, tell him his old buddy Steve said hello.
Regards,
Steve
My buddy that had the Stellings setup (goes by EWB here) had the coolest setup I ever saw on a H2X, and his was faster than mine.
I would try to PM him, and I'll tell him about this thread. Lloyd Burns is a very sharp, nice guy, and can probably give you X dimensions off the top of his head. If you talk with him, tell him his old buddy Steve said hello.
Regards,
Steve
#13
Charter Member #601
Charter Member
Thread Starter
Re: X dimension on a Baja H2X???
I tried to call Lloyd, but got the answering machine. I will try again tomorrow. Baja was closed on Friday afternoon, not a bad deal for a boating company, they can all go boating early on Friday.
I get the feeling that the H2X can use a shorter leg, and from what you say, Lloyd has the experience to know just how short we can go without comprimising too much on other issues.
I sure do appreciate the information, as always the board comes through with communications from people that have been there done that..
I will keep you posted on what we end up with..
Thanks
Dick
I get the feeling that the H2X can use a shorter leg, and from what you say, Lloyd has the experience to know just how short we can go without comprimising too much on other issues.
I sure do appreciate the information, as always the board comes through with communications from people that have been there done that..
I will keep you posted on what we end up with..
Thanks
Dick