Reversion on 502 with Quick and Quiet plus?
03-03-2005, 10:21 PM
#1
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Reversion on 502 with Quick and Quiet plus?
I'm putting together a 500 HP version 502 MPI.
Crane 168731 cam. Intake .587 Exhaust .610
Cam timing @.050 Intake duration 226 exhaust duration 236.
Card does not give LSA. I will be running CMI E tops with Corsa Quick & Quiet Plus diverters and GGB mufflers. The diverters look like they are jacketed and dump water right at the y-pipe connection.
Is this a safe combo or am I heading for trouble?
Crane 168731 cam. Intake .587 Exhaust .610
Cam timing @.050 Intake duration 226 exhaust duration 236.
Card does not give LSA. I will be running CMI E tops with Corsa Quick & Quiet Plus diverters and GGB mufflers. The diverters look like they are jacketed and dump water right at the y-pipe connection.
Is this a safe combo or am I heading for trouble?
03-03-2005, 10:40 PM
#2
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Re: Reversion on 502 with Quick and Quiet plus?
Your duration numbers are mild enough as long as you make sure your LSA on the cam is a minimum of 114, I would actually opt for a 116 Lsa and the motor will idle down farther and smoother with fuel injection and your Bravo will like you better to!
Good Luck with your project motor,
Ray @ Raylar
Good Luck with your project motor,
Ray @ Raylar
03-04-2005, 09:37 AM
#3
VIP Member
VIP Member
Re: Reversion on 502 with Quick and Quiet plus?
I believe the HP500efi uses a cam vary similar to the 731 with a 114°LSA.
The 731 has a 112°LSA...
The 731 has a 112°LSA...
__________________
Patrick
Patrick
