how will these manifolds flow?
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Gainesville, Fl
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
![](http://plaza.ufl.edu/dspear/ebaypics/manifolds.gif)
how do you guys think these manifolds/risers will flow? They are supposedly "high performance". What is the upside and is there any downside. Previously I was running OEM volvo penta manifolds / risers. One of the main reasons I am considering these is that they are stainless.
Thanks,
`Dave
#2
Registered
Thread Starter
Join Date: Jan 2005
Location: Gainesville, Fl
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I dont know who they are manufactured by. The guy that has them seems to think that they are high performance but the look like the old log style to me. Would I be better off with these stainless ones or should i just replace them with new volvo penta OEM product. I was thinking that the one peice design might save me some manintenence in the future.
In addition where can i find some good stainless steel mainifolds/risers in the US? I was given the name of an Aussie but the shipping on those will probably be a fortune.
How can i get in contact with these jcperf or mash/sean h guys?
In addition where can i find some good stainless steel mainifolds/risers in the US? I was given the name of an Aussie but the shipping on those will probably be a fortune.
How can i get in contact with these jcperf or mash/sean h guys?
Last edited by davids94; 03-23-2005 at 03:30 PM.
#3
Were doomed!
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I have no idea about those you have pictured there but it looks to me that there could be a problem if you were docked and a nice set of waves came by and backflowed into the exhaust tubes and down to the cylinders! I dont see anywhere that could have a "water damn" type of plate that could potentialy keep the water at bay if it was to get inside..... Im sure a set of flappers on the exhaust tips would do wonders.
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#5
Gone Fishin'
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I wouldn't touch them. You really want something with equal or nearly equal length runners for any performance gains. As for them being stainless, who cares, they are useless in my opinion.
Check into Revolution Marine, Gill, Eddie Marine, or IMCO if you want some decent manifolds at decent prices in the USA.
Actually, I'd call Fred at Trick Marine. He'll have what you need. He's an advertisor here on OSO. Look for his banner.
Check into Revolution Marine, Gill, Eddie Marine, or IMCO if you want some decent manifolds at decent prices in the USA.
Actually, I'd call Fred at Trick Marine. He'll have what you need. He's an advertisor here on OSO. Look for his banner.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#6
Registered
Thread Starter
Join Date: Jan 2005
Location: Gainesville, Fl
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
The corsa exhaust on the boat already has flappers on the exhaust tips. Should i stil avoid these manifolds? What is a reasonable price to pay for new manifolds / risers .... both stainless and otherwise.
I do not have unlimited funds for this system. Im a 20 year old student with a need for speed and a blown motor. Im repowering and trying to do it right but, within my budget.
I dont need exceptionally high performance manifolds/risers .... just something that will last and perform decently. Im hoping my boat will run about 70 with the repower which is fast enough for me.
The new motor is a 351W ford - up from a 302
I do not have unlimited funds for this system. Im a 20 year old student with a need for speed and a blown motor. Im repowering and trying to do it right but, within my budget.
I dont need exceptionally high performance manifolds/risers .... just something that will last and perform decently. Im hoping my boat will run about 70 with the repower which is fast enough for me.
The new motor is a 351W ford - up from a 302
Last edited by davids94; 03-23-2005 at 03:56 PM.
#10
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by sutphen30
actually cut the pipe off just as its going up.weld on an adapter for some turboes and see how she goes.
then again,i'm nuts.
oh yeah,,turn up the boost,i want to see the new tmp 2400's. ![Drink](/forums/images/smilies/drink.gif)
please forgive me![Evil](/forums/images/smilies/evilB.gif)
![Evil](/forums/images/smilies/evilB.gif)
![Evil](/forums/images/smilies/evilB.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Drink](/forums/images/smilies/drink.gif)
please forgive me
![Evil](/forums/images/smilies/evilB.gif)
Dont forget the green paint.
![EEK!](/forums/images/smilies/eek.gif)